Free Express Shipping Australia
Step 1 Download Update File
Make sure to "Save File". You can also save it directly to the SD card. If you did not save it directly, copy the update file to the SD card. If the update file is the only file on the SD card, the preparation is complete.
Please do not change name of the update file or unzip it. Keep it as it is (Ellipal_ec02_v3.3.5)
PLEASE NOTE: For Mac OS, the preferences within your browser (Safari, Chrome etc) must be set to "stop automatically unzipping downloaded zip files" for the updated file to be extracted properly. It will not work unless it is a zip file.
Step 2 Connect Adapter To ELLIPAL Titan
FOLLOW THESE STEPS CAREFULLY
1 - Turn off the ELLIPAL Titan
2 - With just the Adapter, insert the SD card into the Adapter.
3 - Plug the USB cable to the Adapter (make sure the USB cable is connected to a power source)
4 - With the SD card in the Adapter and plugged in, connect it to the ELLIPAL Titan while it is off.
5 - Wait until ELLIPAL Titan shows a charging sign and then turn it back on.
*Note: We recommend not using Laptop as power source, use a normal power socket instead.
Step 3 Update
1 - Turn on the ELLIPAL Titan and select settings.
2 - Select update, the ELLIPAL Titan should recognize the update file in the SD card.
3 - It will start extracting the update file automatically, please wait and don't disconnect the adapter.
It can take up to 20 minutes.
4 - After extraction is finished, another menu will appear. Select "Start Update".
5 - Wait about 5 minutes and the update is finished.
*Note: The ELLIPAL Titan may act like turning on and off during the process,
please don't worry and don't touch it.
Please make sure tips below
1. Make sure the SD card is formatted to FAT32 (Allocation unit size to 32kb)
2. SD card has been emptied and has only 1 update file in it
3. Check the SD card is plugged into Adapter totally
4. Put Ellipal on charge during updating process.